| Hilary asked us |
We have a Victorian terrace house with a timber built bay. It was originally glazed with sash windows. These were replaced some time ago with (hideous) casements.
Would we have to put in new framework if we were to revert to sash windows or could they be fitted to the original bay structure which appears to be in good order except for some damp rot at the botom which would need to be cut out and repaired. |
 |
| Mr Rose, Managing Director replied: |
 |
Dear Hilary,
Many thanks for your question.
Traditional box frame sash windows are normally self-supporting, so I certainly hope that new ones could be fitted into the original bay structure.
However, you really need an expert to inspect the bay first hand and give you the verdict on that. Cutting out the rot and repairing at the bottom should not be a problem.
I will ask the local Company Estimator to contact you. He is extremely experienced and can offer you a free best advice report on how to tackle the bay.
Yours sincerely
John Rose
|
 |
| Caroline asked us |
We have a 1903 Victorian three storey house, plus loft conversion. We would like to replace the existing original sash windows on the ground floor with double-glazed sash windows for maximum heat conservation. Can you do this? |
 |
| Mr Rose, Managing Director replied: |
 |
Dear Caroline,
Thank you for your enquiry.
Our original features, timber sash windows have "triple glass sealed units" installed as standard. This enables certification by the British Fenestration Ratings Council regarding energy efficiency.
What does this all mean for you? Well, simply that they're really, really warm for the lowest possible fuel costs!
We are the only manufacturers and installers of such timber sash windows in U.K.
Yours sincerely
John Rose |
 |
| Ruth asked us |
I would like a costing please for replacing my front door to a replica Victorian 4 panelled one please. I would like it as plain as possible with very simple mouldings and be made from FSC approved or reclaimed wood.
The existing one is 80.5cm x 206cm and I'd like the 2 glazed panels to be double glazed, frosted and of toughened glass. Do you provide a paint service and door furniture/lock fitting too?
|
 |
| Mr Rose, Managing Director replied: |
 |
Dear Ruth,
Thank you for your kind enquiry.
We do provide replica, original period front doors, fully finished.
That is, they are made-to-measure from FSC oak to the traditional design and come with full furniture/looks. Security glazing and paint colour is to your choice from our comprehensive range.
The things we do not yet know about are:
Regarding fitting, which is an important part of the cost, what area do you live?
If you are in the South-East we could have a look at what is involved and take details for costing.
Those details would include the proportions of the panels.
Or if you live outside of the South-East, perhaps you could email, or post, a photo to us?
Is there a true original door in a neighbourhood house? If so we could replicate that.
We look forward to hearing from you, we may have a local Company Estimator to help in the above.
Yours sincerely
John Rose |
 |
| Mr H asked us |
Hi, We currently have a (Victorian) flat Bristol. We really want to keep the character of the place, so need a quote
for wooden sash (double glazed?) windows:
- 4 windows in the bay
- 1 for the rear bedroom.
We are on a main road so preferably ones that keep the noise out! |
 |
| The Company Estimator replied: |
 |
| Thanks for your enquiry.
It is quite possible to retain the character of the place AND keep the noise
out, using specialist sliding sash windows in timber.
The method should be in two parts:
1. Adapt the new glazing so it maximizes reduction of noise from outside,
WITHOUT LOSING THE ORIGINAL FEATURES. This has been achieved by our
technical developments in the manufacture of sealed glass units, which we
now use as standard.
2. Install a superior draught proof system integrally when making the new
windows. This is because a proportion of sound entering your home is not
coming through the materials but is carried on air waves (Pilkington Tech.
Dept.).
I will ask our Company Estimator who covers your area to contact you to give
you an idea of cost.
Kind regards, the Company Estimator.
|
 |
| Charlie asked us |
Hi, I am currently renovating two small farm workers cottages and ripping out the pvc windows. I would like to replace with hardwood sash windows but understand that for building regs they require double glazing.
Are you able to send a specification of your typical hardwood sash windows to me or if you prefer, direct to my architect for inclusion with our building regs application?
Also is it possible/wise to make them to be left unpainted and if so would you advise treating them with something? |
 |
| The Company Estimator replied: |
 |
| Hi Charlie,
In answer to the two queries you raise, we are happy to send you the specifications, would you like to forward your Architect's contact address.
The manufacturing process entails factory fitting the glass sealed units into the timber frames, which therefore also means factory painting. However the hardwood we use is prime oak which contains it's own natural preservatives, so there is no need for harmful chemical preservative.
If you live in the South East we can offer you our supply and fit service. If you're located outside of the South East, we recommend supply only and a competent local builder.
Kind regards, the Company Estimator.
|
 |
| For futher information, please submit your comment or question here. |
 |
| For a no obligation quotation, please click here . |
 |